Low temperatures will reduce the spring force from the nominal value and high temperatures will increase it.
to remove the Gas Springs from a tanning bed in the CLOSED POSITION.
#Sunquest tanning bed lid wont stay closed pro
Question- Does the temperature in the tanning room effect the pressure of the gas spring?Īnswer- Yes, the force in a gas spring will vary with temperature. We stock gas springs for Sunquest, Sunvision, Sunal, Pro Sun, ETS, Montego Bay etc. In cases where it is rarely used, the mechanism should be operated occasionally to maintain effectiveness of internal lubrication. Question- Should I lubricate the gas spring?Īnswer- Do not lubricate the gas spring. Ditch the pillow Yeah, you heard it right Most tanning salons provide pillows in their tanning beds. Follow this and you might have the best tan of your life.
#Sunquest tanning bed lid wont stay closed how to
From my own experience and other incidents, here’s a complete overview on how to lie on a tanning bed. Caution- Canopy (Top) of bed must be fully open to be able to remove the gas springs, do not attempt to remove the Gas Springs from a tanning bed in the CLOSED POSITION. Using some of the best tanning bed lotions is also very essential. Once these safety clips are removed you can then remove the gas springs from your tanning bed. Question- How do you remove a Gas Spring for a Tanning Bed?Īnswer- Below are three different illustrations that show how to remove the Locking Clips from the Ball Joints. Gas springs should not be mounted in a binding situation and should not come into contact or rub against any surface as this will create “side loading” which is detrimental to the springs. Solar Storm 36ST 220V Stand-Up Tanning Bed. Cash/Credit Card Price: (- instant coupon 300 ) 2,295.00. This position keeps the oil against the seal and provides maximum dampening at the end of the stroke. Solar Storm 24 Lamp 110V Home Tanning Bed With Face Tanning Lamps. Easily share your publications and get them in front of Issuu’s.
Question- Which way should a gas spring be mounted?Īnswer- Gas spring should be mounted with the rod end down in the closed or normal position. Issuu is a digital publishing platform that makes it simple to publish magazines, catalogs, newspapers, books, and more online. Thus, the net effect of a Hydro-lift is to allow assistance in lifting with substantially stiffer closing resistance. Question- What makes a Hydro-lift gas spring different from a Standard tanning bed gas spring?Īnswer- A Hydro-Lift gas spring is similar to a standard gas spring except for the added option of a pressure relief valve that is effective during the compression stroke. We stock gas springs for Sunquest, Sunvision, Sunal, Pro Sun, ETS, Montego Bay etc… Tired of your cutomers complaining about how hard it is to open your tanning bed.